Expert Support
🔧 Can't make it to our shop? No problem. Our parts are engineered to be installed by any trusted local mechanic — no specialty tools or factory training required. We stay booked 12+ months out on in-house builds, but you don't have to wait. Full builder support included — we're here to help you and your mechanic get it done right.
Description
The Wicked Wrench Motorsports Gen V LT Jeep JK Motor Mounts are the precision-engineered foundation for dropping a modern GM Gen V engine into a 2007–2018 Jeep Wrangler JK or JKU. Fully bolt-in and adjustable forward, backward, and side-to-side, these mounts locate your engine in the exact sweet spot for flawless steering shaft clearance, optimal firewall spacing, and correct front driveshaft alignment — sold as a set.
We use a hydraulic Corvette motor mount for the perfect balance of comfort and strength. The engine sits lower in the engine compartment for a cleaner, more centered install. Each mount is clearly marked (D) Driver and (P) Passenger facing forward for easy installation. Shims can be used to raise the engine if needed.
Important: Due to the lower engine position, L83 / L86 / LT1 engines must use a centered water pump (like our accessory drive or equivalent).
⭐⭐⭐⭐⭐ What Builders Are Saying
"They promptly shipped my parts. Incredibly knowledgeable and willing to assist. Great people."
— David S. ✅ Verified Customer
"Knowledge on all gen 5 and square body conversion. Helped me with the set up I need for my 81 Jimmy."
— Midtown Roofing ⭐⭐⭐⭐⭐ Verified Customer
"Was a huge help! I'm building a massive 30+ inch lifted SAS truck. Always answered my questions and had some parts laying around he helped me with. Really great guy and huge help."
— DustAllDay ⭐⭐⭐⭐⭐ Verified Customer
Compatibility:
- Vehicle: 2007–2018 Jeep Wrangler JK / JKU
- Engines: L83, L84, L86, L87, LT1, L8T (Gen V LT)
Key Features:
- Fully Bolt-In & Adjustable: Forward, backward, and side-to-side adjustment for precise engine placement
- Hydraulic Corvette Motor Mount: Absorbs harsh engine harmonics without breaking down from oil or heat
- Lower Engine Position: Sits the engine lower in the bay for better weight distribution and clearance
- Optimized Placement: Precision-measured for maximum clearance at the steering shaft, front suspension, and brake booster
- Heavy-Duty Construction: Laser-cut and CNC-bent from thick structural steel to handle high-torque off-road and towing demands
- Easy Install: Clearly marked driver and passenger sides; anchors directly to factory Jeep frame rails
Why Choose Wicked Wrench?
No garage fabrication, no guesswork. These mounts are built specifically for the JK chassis so your Gen V swap goes in clean and stays solid on the toughest trails.
⚙️ Building a full Jeep JK Gen V LT swap? Check out our complete Jeep JK Gen V LT Swap Kit collection for everything you need in one place.
🔧 Frequently Paired Parts:
- Jeep JK Gen V Swap Transmission Bracket
- Jeep JK 6L / 8L90 Transmission Shifter Cable Bracket
- Jeep JK 10L90 Transmission Shifter Cable Bracket
- Jeep JK Gen V LT ECM & Fuse Block Bracket
- Jeep JK Dual Transmission & Power Steering Cooler Bracket
- 8L90 / 10L90 241J Adapter, Spacer & Clocking Ring
- 241J (Modified) 32 Spline Input Shaft